|
|
 |
|
F240 Wood Burning Workshop and Factory Space Heater |
 |
|
|
Fabbri Model F240 purpose designed workshop and factory space heater for fan flue.
Ideal for heating large workshop and factory spaces with wood logs and secondary wood waste.
Heat output of the F240 is 240,000 Kcal/h, (279kW),
|
Overview
|
Construction
- The horizontal stainless steel combustion chamber has purpose designed reinforcing ribs for extended life.
- The frame is constructed from painted profile steel, with zinc plated outer side panels.
- The loading door and ash removal door are both refractory lined steel.
- The gate system has steel cross members enabling easy maintenance.
Hot Air Distribution
- The air side centrifugal fan is low speed with anti-vibration mountings designed to reduce noise.
- Fan automatically operates on temperture.
- Fitted as standard with top rotational directional vent tubes.
- Hot air ducts can be added to transfer heat to multiple locations.
Chimney Operation
- For use with natural draught chimneys.
- Chimney requires suitable height for the appliance to operate, normally a minimum of 5 metres and terminate out of any potential down draught zone.
|
 |
|
|
Product Details
|
|
| A |
Width mm
|
1,100
|
| B |
Height mm
|
2,250
|
| C |
Length mm
|
1,900 |
| D |
Flue diameter od
|
200 |
| L |
Hot air delivery pipes
|
3 x 300 Ø |
| M |
Plenum chamber mm
|
250 |
| E |
Combustion chamber length mm
|
1,200 |
| F |
Combustion chamber width mm
|
740 |
| G |
Combustion chamber height mm
|
1,040 |
Fuels
- Wood logs
- Wood chips
- Secondry clean wood waste
- Peat
The heat outputs below are based on fuel with 3500 Kcal/kg (4.1kW/kg)
Wood moisture content should below 20% dry scale
Energy Requirements and Outputs |
|
|
Heat input
|
300,000 kcal/h
|
Heat output
|
240,000 Kcal/h
|
Heat output
|
279kW
|
Air flow (at 15°)
|
17,800 mc/h
|
Fuel consumption @3,500 Kcal/h
|
85 kg/h
|
Ventilation motor
|
4kW
|
Flue fan
|
0.75kW
|
Motor voltage
|
440v three phase
| |
|
Gallery
 Controller |
Operation |
Flue Fan |
|
|
|
|
Technical
|
|
| Typical installation clearances from inflamable materials and servicing access |
Installation clearances
|
| Model |
A |
B
|
C
|
D |
| F28 |
1000 |
600
|
600 |
1500 |
| F55 |
1000
|
600 |
600
|
1500
|
| F85 |
1000
|
600
|
600
|
1500
|
| F120 |
1200
|
600
|
600
|
1800
|
| F240 |
1200
|
600
|
600
|
1800
|
| F350 |
1200
|
600
|
600
|
2000
|
Measurements shown in mm.
| |
|
|
Documents
| TITLE | PRODUCTS | EDITION |
| Fabbri Brochure & Price | Fabbri | 01/2010 |
|
| F120 F240 Instructions | Fabbri | 11-09 |
|
Related Products
F120 Workshop and Factory Space Heater Fabbri Model F120 purpose designed workshop and factory space heater for fan flue
Ideal for heating large workshop and factory spaces with wood logs and secondary wood waste.
Heat output of the F120 is 120,000 Kcal/h, (140kW),
|
F350 Workshop and Factory Space Heater Fabbri Model F350 purpose designed workshop and factory space heater for fan flue.
Ideal for heating large workshop and factory spaces with wood logs and secondary wood waste.
Heat output of the F350 is 350,000 Kcal/h, (407kW),
|
|
|
 |
|
 |
|
Fabbri wood burning space heaters for workshop and factories brochure and price list 
