HDG Euro 30kW split log wood central heating boiler
The HDG Euro is a 30kW gasification wood burning boiler for use with wood logs and clean wood waste.
The fuelling chamber volume is 220 litre which will produce approximately 250kWh from softwood and 320kWh from hard wood per fuelling.
What is special about HDG Euro 30kW
Fuel
Split log wood up to half-metre lengths (19"),
Pressed wood briquettes,
Coarse cuttings and lumped wood waste
Large wood shavings
Area of application
Private households,
Agriculture and forestry
Commercial businesses
Wood processing business
Cabinet-making workshops
Saw mills
Very user-friendly and convenient,
Very long intervals between refills,
Low emissions
Ideal for dry bulk goods
Controlled combustion with great variety of fuels
Usually one refueling of fuel per day is suuicient
Special features
90 % efficiency,
Burner nozzles, and special vortex combustion
Meets the missions controls and safety requirements of most European countries,
Awarded the German KWF prize for innovation
Combustion-controlled, side-burning wood boiler. Type-tested to DIN EN 303-5 and DIN 4751-2, certified to EC Pressure Equipment Directive 97/23/EC. Pressure-tested, welded furnace body made of 5-6 mm tested boiler steel, fueling chamber is made of 10mm thick high quality steel this ensures extremly long life (pre-assembled, powder-coated in green (RAL 6011) or yellow (RAL 1007) 80 mm glass wool insulation, safety heat exchanger fitted as standard.
Large fueling chamber (220 liters, 560 mm wide) for logs up to 500mm and coarsely chopped wood for long refill intervals; highly temperature-resistant burn-off nozzle with special cross combustion chamber for minimum emissions and maximum efficiency; power-controlled suction draught ventilator with servo drive for separate primary and secondary air control; oxygen and flue temperature sensors fitted ready to plug in; ergonomic design for convenient fueling using the large front hatch.
HDG Lambda Control 1 boiler control units The boiler control units of HDG Lambda Control have ingenious combustion control systems. The combustion values are determined through the oxygen sensor and the flue gas sensor. These values are evaluated and the primary and secondary air flaps then precisely regulated for continuously optimal values even under variable conditions.
HDG Lamba Control 1
Intelligent emission management
In the HDG Lambda-Control 1, the following parameters are continually measured and also shown on the display:
The residual oxygen in the flue gas (with the aid of the oxygen probe), in order to achieve optimal combustion.
The exhaust air temperature (with the aid of the flue gas temperature sensor), in order to achieve a constant degree of efficiency;
The temperatures of the boiler and accumulator storage tank, in order to determine their operating status.
The HDG Split Log Boiler Range Brochure, which includes the Navora, SL, Euro, Turbotec and Bavaria Ranges and their Technical Data and Dimensions
Euro log wood boiler, plan view
